Product Center

Neoprene Sealant

This product is a versatile, durable acid glue used for glass sealing and building materials. The product is suitable for the assembly of glass, aluminum alloy, ceramics, glass fiber, plastic steel, non-oily wood, etc. Powder-coated aluminum alloys must be completely removed from the wax finish with a solvent.

Classification:

Products

Key words:

Aluminum veneer

WhatsApp：

15216838880

Email:

sales@alucojmh.com

Product Description

Features of the product:
It is made of neoprene rubber from DuPont Company of the United States, which is made by mastication, pre-crosslinking treatment and homogenization. This product is light yellow and translucent, with elegant smell, strong initial adhesion and high final strength. It can also be used in cold conditions, not freezing at -20°C, and can be cold cured. Good aging resistance. This product belongs to the series of decorative adhesives, and it is a necessary product for high-grade and high-grade decoration of hotels, hotels, and villas.

The scope of application is
used in decoration, furniture production, automobile interior decoration, advertising and other fields. It can paste the same and dissimilar materials such as aluminum-plastic board, fireproof board, wood, leather, furniture, metal, rubber, plastic, etc.

Construction Reference
: Clean, dry, and roughen the glued planes of the two bonded objects. Determine the amount of glue applied according to the pore density of the bonded plates. Usually, one coat is enough. If special circumstances or special materials require two coats, you must wait. Let it dry for one time and then apply it a second time. The glue should be applied evenly and let it dry for 5-50 minutes to form a dry film (it will not be stringy or sticky to the touch). Check the bonding position once and use a rubber mallet after fitting. Hammer evenly from the inside to the outside to apply pressure and exhaust. Glue application and pressure must be even and in place to avoid blistering and edge opening; if dilution is required, please use our company's special diluent, and use a brush or special scraper as the glue application tool.

Tips
1. When bonding dense materials such as aluminum-plastic panels and fire-resistant panels, it is necessary to drill some air holes on the substrate to avoid bulges after bonding.
2. When used outdoors, the bonding seam should be potted with glass glue to avoid water seepage and glue opening.
3. It should be used in a ventilated and dry construction environment, and keep out of reach of children.
4. This product is flammable and should be stored in a cool and dry place, away from fire, heat sources and sun exposure.

Message consultation

Do you have any need, Please leave a message here, We will give you a reply in 24 hours